LC004 | Bio-Dex Liquid Stabilizer Conditioner 1 GAL
LC004 | Bio-Dex Liquid Stabilizer Conditioner 1 GAL
SKU#: LC004
Bio-Dex Liquid Stabilizer Conditioner Dissolves Rapidly in Swimming Pool Water to Reduce Chlorine Loss Caused by the Ultraviolet Rays of the Sun
For Above-Ground, Fiberglass and Vinyl Pools Liquid Stabilizer Conditioner is a Good Choice.
$41.99
Cyanuric Acid ......................24.92%
Use a reliable test kit to determine stabilizer concentration in water. If the pool water tests less than 40 ppm (parts per million) add Liquid Stabilizer Conditioner to obtain a level of 40-100 ppm. One gallon container will raise a 10,000-gallon pool's stabilizer concentration to 32 ppm.
-
Product Details
About this product
Description
A properly stabilized pool will extend the life of your sanitizer and save you money by avoiding excessive chlorine demand.
Stabilizer is to pool chlorine as your home’s insulation is to retaining warm or cold air – it helps chlorine last longer. When the stabilizer level in your pool is low, you’ll need to use a lot more chlorine to keep your swimming pool clean, so you’ll spend more money on chlorine. Use Bio-Dex Liquid Stabilizer Conditioner to maintain appropriate stabilizer levels in your pool.
Features
Cyanuric Acid ......................24.92%
Use a reliable test kit to determine stabilizer concentration in water. If the pool water tests less than 40 ppm (parts per million) add Liquid Stabilizer Conditioner to obtain a level of 40-100 ppm. One gallon container will raise a 10,000-gallon pool's stabilizer concentration to 32 ppm.
Brand Information
-
Specifications
Liquid Stabilizer Conditioner dissolves rapidly to reduce the loss of chlorine in pool water caused by the ultraviolet rays of the sun.
- Turn on the circulation pump.
- Shake the product well before use.
- Slowly add an entire gallon of Liquid Stabilizer Conditioner to the pool in front of a return
- Rinse the container with pool water and shake. Repeat step #3.
- Re-balance your swimming pool in accordance with the guidelines below.
NOTE: It is normal for the pool water to become a cloudy following application for a short period of time. Allow 30 minutes for the pool to clear.
- Maintain pH in the range of 7.4 to 7.6.
- Maintain total alkalinity in the range of 60 to 120 ppm.
- Maintain calcium hardness range between 200-400 ppm.
- Maintain available chlorine level at 2-4 ppm.
Active Ingredients:
Cyanuric Acid ......................24.92%
Inert Ingredients .................75.08%
Total ....................100% -
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account