Intex | 28000E | Deluxe Wall Mount Surface Skimmer

Keep your pool clear of leaves and debris all summer long with the Intex Deluxe Wall Mount Surface Skimmer routes surface water through the strainer basket on its way to the filter pump, automatically catching leaves and other debris before they sink to the bottom of the pool!

• Requires an Intex Filter Pump with a minimum flow rate of 800 gallons per hour (3.0 m3/hr)
• Easily mounts to Easy Set or Metal Frame Pool sidewalls

If no water is flowing into the pump, make sure that the surface skimmeris perpendicular to the water surface and below the water surface. Open the air release valve located on the filter housing top cover. When water starts to flow out, close the air release valve back. Never run the pump dry as the motor may overheat and damage the pump!

• Remove the skimmer and the hook assembly from the pool before placing a pool cover over the pool.
• Store the product and accessories in a dry and safe place indoors.

NOTE: On a weekly basis, remove the hose adaptor from the outlet fitting connection to ensure the threaded strainer connector is free from debris, hair and algae. Also make sure the cartridge in the fi lter pump is clean and there is no leakage in the circulation system.