Pentair | K12415 | Kreepy Krauly Kruiser Silent Flapper Kit

$24.99
Out of stock
SKU
K12415
Ask a Question

Ask a Question

Pentair | K12415 | Kreepy Krauly Kruiser Silent Flapper Kit

SKU#: K12415

Pentair Silent Flapper Replacement Kit for Kreepy Krauly Kruiser Inground Suction Side Automatic Pool Cleaner K12415

$24.99

Check the Vacuum Seal
1. If the vacuum seal becomes thin and too floppy, it will impair the correct random movement of the cleaner.
2. Replace the vacuum seal if needed.
Other Maintenance
• Inspect the foot pad for wear. Replace when the traction pads on the bottom have worn down.
• Inspect the regulator valve and flush away any debris build up.
• Clean your filter system.
• Empty the skimmer basket.

Ask a Question
Pentair | K12415 | Kreepy Krauly Kruiser  Silent Flapper Kit Pentair | K12415 | Kreepy Krauly Kruiser  Silent Flapper Kit Pentair | K12415 | Kreepy Krauly Kruiser  Silent Flapper Kit
Pentair | K12415 | Kreepy Krauly Kruiser  Silent Flapper Kit
  • Product Details

    About this product

    Description

    Cleaning the Flapper
    1. Turn off the pump.
    2. With your hand, unscrew and lift the external housing to view the flapper.
    3. Push the latch upward to remove the flapper lid. Take off the lid and inspect the flapper for debris. (See images on this page).
    4. Be sure the flapper is moving freely up and down and that it is securely clipped into place.
    5. Put the lid back and slide the lock down to close. (No tools are required).
    6. Place the external housing back over the flapper and hand tighten

    Highlights

    Removing Damaged or Worn Flapper
    1. Pull the flapper and wiggle outward until it un-clips from the pin.
    2. To install the new flapper, push it in firmly (TOP side up as marked) onto the pin until it snaps into place. If flapper is clipped the wrong way (TOP side down) you will not be able to close the lid.

    Features

    Check the Vacuum Seal
    1. If the vacuum seal becomes thin and too floppy, it will impair the correct random movement of the cleaner.
    2. Replace the vacuum seal if needed.
    Other Maintenance
    • Inspect the foot pad for wear. Replace when the traction pads on the bottom have worn down.
    • Inspect the regulator valve and flush away any debris build up.
    • Clean your filter system.
    • Empty the skimmer basket.

    Brand Information

    Founded in 1966, Pentair has engineered water solutions to filter, clean and sanitize water to its purest state, while automation equipment makes it all easy to control from anywhere so that you can truly enjoy your pool and spa.

    Visit Manufacturers Website
  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov