Hayward | AXV429WHP |PoolVac Bumper White

a) Turn off pump.
b) Remove Pool Vac Ultra from pool.
c) Disconnect Pool Vac Ultra from leader hose.
d) Turn Pool Vac Ultra upside down, and place it in a position that is steady/firm.
e) Locate and loosen the captive screw behind the throat in the center of the bottom
f) Lift “Easy Opening Bottom”
g) Remove four (4) “A” screws
h) Lift the Lower Body Assembly off the Pool Vac Ultra
i) Remove four (4) “B” screws
j) Remove bumper carefully, making sure that other cleaner parts are not moved or disturbed.
k) Remove two (2) “C” screws
l) Replace bumper, again making sure that other cleaner parts are not moved or disturbed.
m)Reinstall screws and parts, following steps in reverse - k, i, h, g, f, e, d, c.
n) Reinstall Pool Vac Ultra in pool per installation instructions and/or installation video.