543720 | Rola-Chem Pro Series Pump

Install the ROLA-CHEM® pump in an area protected from natural elements (sun, rain, freezing, etc.).
Environmental effects may increase required service and maintenance.
The inlet side of the pump must be above the incoming liquid and the chemical container.
Flooded suction is not required or recommended.
Ensure that the tube can be routed without allowing it to kink.
Do not install directly above the chemical container or other equipment that can be damaged by chemicals. Wall mounting key slots are provided on the rear of the pump enclosure (6.25” apart for #10 screws).
Comply with local health codes. Cross connections must not allow undesired chemical treatment.