400006 | Pentair WhisperFlo And IntelliFlo XF Pumps Lid Whit Locking Ring

$49.99
In stock
SKU
400006
- +
Ask a Question

Ask a Question

400006 | Pentair WhisperFlo And IntelliFlo XF Pumps Lid Whit Locking Ring

SKU#: 400006

Pentair XF Series Lid And Locking Ring For WhisperFloXF and IntellifloXF Pumps 400006

$49.99
Ask a Question
400006  | Pentair WhisperFlo And IntelliFlo XF Pumps Lid Whit Locking Ring 400006  | Pentair WhisperFlo And IntelliFlo XF Pumps Lid Whit Locking Ring 400006  | Pentair WhisperFlo And IntelliFlo XF Pumps Lid Whit Locking Ring
400006  | Pentair WhisperFlo And IntelliFlo XF Pumps Lid Whit Locking Ring
  • Product Details

    About this product

    Description

    1. Press Start/Stop button on the pump and turn off the pump at the circuit breaker. Disconnect communication cable from pump.
    2. Relieve pressure in the system.
    3. Turn the lid and locking ring counter-clockwise and remove from the pump.
    4. Remove debris and rinse out the basket. Replace the basket if it is cracked.
    5. Put the basket back into the housing. Be sure to align the rib on the basket with the notch in the volute.
    6. Fill the pump pot and volute up to the inlet port with water.
    7. Clean the lid and locking ring, O-ring, and sealing surface of the pump pot.

    Highlights

    Note: It is important to keep the lid O-ring clean and well lubricated.
    8. Reinstall the lid by placing the locking ring and lid on the pot. Be sure the lid O-ring is properly placed. Seat the locking ring and lid on the pump then turn clockwise until the locking ring handles are horizontal.
    Note: Ensure that the side of the lid/locking ring marked “Front” is positioned at the front of the pump.
    9. Turn the power “ON” at the circuit breaker. Reconnect communication cable from pump.
    10. Open the manual air relief valve on the top of the filter. Stand clear of the filter.
    11. Wait until all pressure is relieved. Start the pump.
    12. Bleed air from the filter until a steady stream of water comes out of the filter air relief valve. Close the manual air relief valve.

    Brand Information

    Founded in 1966, Pentair has engineered water solutions to filter, clean and sanitize water to its purest state, while automation equipment makes it all easy to control from anywhere so that you can truly enjoy your pool and spa.

    Visit Manufacturers Website
  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov