25650-100-000 | CMP Brillant Wonders LED Remote

$199.99
Out of stock
SKU
25650-100-000
Ask a Question

Ask a Question

25650-100-000 | CMP Brillant Wonders LED Remote

SKU#: 25650-100-000

CMP LED Color Wheel Remote for Brilliant Wonders LED Waterfall  25650-100-000

$199.99

  • Power: Rechargeable 5 Volt DC built in Lithium battery
  • Working Current: 30mA
  • Working Frequency: 2.4 GHZ
  • Battery Capacity: 1000mAh
  • Charge Time: <4 hours
  • Normal Usage Time: 30 days
  • Number of charge cycles: 500
  • Operating range: up to 90 feet (dependent on environment)
  • Operating temp: -30°C to 55°C
  • Dimension: 5.7”L x 2.2”W x 0.9”H
  • Weight(net): 200g
Ask a Question
25650-100-000 | CMP Brillant Wonders LED Remote 25650-100-000 | CMP Brillant Wonders LED Remote 25650-100-000 | CMP Brillant Wonders LED Remote
25650-100-000 | CMP Brillant Wonders LED Remote
  • Product Details

    About this product

    Description

    4. CHARGING METHODS
    1. When charging, connect the USB cable to the mobile charger or a computer
    with USB interface. The remote control must be turned on to charge.
    2. The blue indicator light flickers while charging, and will turn green when
    fully charged
    3. No memory effect in the lithium battery of the remote control. Follow the
    standard charging procedure even for the first three charges. There is no
    need to over charge.
    4. The red indicator light flickers when the battery is low and needs to be
    charged soon. Charging in low battery will effect battery life.

    Highlights

    KEY

    DESCRIPTION

    ON/OFF

    Turn on and off the receiver (or LED light).

    PAUSE

    Press to stay on current color.

    MODE

    Press to select next or previous mode.

    SPEED

    Press to adjust program speed

    BRIGHTNESS

    Press to increase or decrease brightness.

    TOUCH CIRCLE

    Touch to select a color.

    SCENE MODE

    Press 1-9 to load stored modes.

    Hold for three seconds to store current mode.

    Press Play to cycle modes.

    Features

    • Power: Rechargeable 5 Volt DC built in Lithium battery
    • Working Current: 30mA
    • Working Frequency: 2.4 GHZ
    • Battery Capacity: 1000mAh
    • Charge Time: <4 hours
    • Normal Usage Time: 30 days
    • Number of charge cycles: 500
    • Operating range: up to 90 feet (dependent on environment)
    • Operating temp: -30°C to 55°C
    • Dimension: 5.7”L x 2.2”W x 0.9”H
    • Weight(net): 200g
  • Specifications

    HOW TO PAIR THE CONTROLLER WITH THE REMOTE

    The remote control has 18 function buttons and 1 full-color touch circle. The controller
    has 8 touch buttons.
    HOW TO PAIR THE CONTROLLER WITH THE REMOTE
    Press the “ON/OFF” key on the controller until you hear the “BEEP” sound, then press
    the “1” key on the remote to activate the connection between the controller and remote
    control. Press the “2” key to cancel the connection

    COLORWHEEL REMOTE SETUP

    Power off the controller and remote

    Turn on controller

    Press and hold the On/Off button on controller until you hear a tone (keep holding)

    Within 5 seconds turn on the remote. Press and hold #1 Key until remote flashes green

    You should now be back in sync.

  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov