RP-204 | Poolmiser Automatic Water Leveler Ring and Lid WHITE

$18.99
In stock
SKU
RP-204
- +
Ask a Question

Ask a Question

RP-204 | Poolmiser Automatic Water Leveler Ring and Lid WHITE

SKU#: RP-204

Poolmiser Lid for Automatic Pool Water Leveler  Auto Fill WHITE RP-204

$18.99

  • The Poolmiser will operate if it is placed one foot from the pool or up to 30 feet away.
  • The Poolmiser is capable of adding up to 4000 gallons of water in a 24 hours period.
  • The Poolmiser should be turned off completely for 15 days after installation to make sure your pool is not leaking.
  • If the valve does not close completely, or if it drips, there is some dirt or debris in the valve cap. Clean the cap under running water, and flush the line.
  • Water hammer can be caused by a variety of factors……if you experience water hammer in the operation of your POOLMISER, consult with a plumber.The Poolmiser is made of ABS plastic; most of the piping is made of PVC plastic. Be sure to use a pipe cement compatible with both materials.

INSTRUCTIONS

Ask a Question
RP-204 | Poolmiser Automatic Water Leveler Ring and Lid WHITE RP-204 | Poolmiser Automatic Water Leveler Ring and Lid WHITE RP-204 | Poolmiser Automatic Water Leveler Ring and Lid WHITE
RP-204 | Poolmiser Automatic Water Leveler Ring and Lid WHITE
  • Product Details

    About this product

    Description

    • Comes with an anti-siphon valve & built-in 1″ overflow line

    • 3 1/2″ deep ring for adjustments to thickness of decks

    • Less time to install than ordinary fill and overflow lines

    • No electrical hookups

    • It prevents water level drop and overflow, thus eliminating pump burnout, plastic discoloration, raised decks, and chemical loss

    • Eliminates complaints of leaks due to excessive evaporation

    • It saves time and money for you and your customers

    Features

    • The Poolmiser will operate if it is placed one foot from the pool or up to 30 feet away.
    • The Poolmiser is capable of adding up to 4000 gallons of water in a 24 hours period.
    • The Poolmiser should be turned off completely for 15 days after installation to make sure your pool is not leaking.
    • If the valve does not close completely, or if it drips, there is some dirt or debris in the valve cap. Clean the cap under running water, and flush the line.
    • Water hammer can be caused by a variety of factors……if you experience water hammer in the operation of your POOLMISER, consult with a plumber.The Poolmiser is made of ABS plastic; most of the piping is made of PVC plastic. Be sure to use a pipe cement compatible with both materials.

    INSTRUCTIONS

    Brand Information

    Poolmiser is the industry standard for auto-fill devices utilizing advanced float technology to maintain a pre-set water level in your pool. Poolmiser has been servicing the pool industry since 1978 with the most reliable water leveler on the market. Built for ease of use and durability, pool builders have been turning to PoolMiser as their first line of safety.

    Visit Manufacturers Website
  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov