K121620 | Pentair Kreepy Krauly Cleaner Wire Diverter

TO INSTALL DIVERTER

NOTE: IF NO EYEBALL FITTING IS PRESENT SKIP TO STEP NUMBER 3 (FLUSH CUT PIPE INSTALLATION).

1. Remove the threaded ring and eyeball. Leave the threaded bushing in place in the return line as shown in figure 5.
2. Insert the diverter wire fully into the return line, making sure to lift the diverter cap to rest onto the top of the threaded busing as shown in figure 6. With the pliers, tap the end of the diverter cap to seat the wire until the diverter feels secure. You may also twist the cap side to side as you tap its end to get a more secure fit.

FLUSH PIPE INSTALLATION

3. Insert the diverter wire fully into the return line, with the pliers, tap the end of the diverter cap to seat the wire until the diverter feels secure.