79107800 | Pentair SpaBrite Spectrum AquaLight Tempered Lens 4'' Clear
79107800 | Pentair SpaBrite Spectrum AquaLight Tempered Lens 4'' Clear
SKU#: 79107800
Pentair Tempered Lens 4" Clear For SpaBrite Spectrum AquaLight Lights 79107800
$19.99
Before replacing the light fixture.
1. Verify that the pool meets the requirements of the current National Electrical Code and all local codes and ordinances.
A licensed or certified electrician must install the electrical system to meet or exceed those requirements before the
underwater light is installed. Some of the requirements of the National Electrical Code which the pool’s electrical
system must meet are as follows:
a. The lighting circuit must have a Ground Fault Circuit Interrupter (GFCI), and must have an appropriately rated circuit breaker.
b. The Junction Box (or, for 12 volt models, the low voltage transformer) must be located at least 8 inches above ground or water level, at least four (4) inches above ground level, and at least 48 inches from the edge of the pool; see Figure 1.
c. The light fixture and all metal items within 5 feet of the pool must be properly electrically bonded.
d. The wet niche must be properly installed so that the top edge of the underwater light’s lens is at least 18 inches below the surface of the water in the pool; see Figure 1.
e. The wet niche must be properly electrically bonded and grounded via the No. 8 AWG ground connector located at the rear of the niche; see Figure 1
-
Product Details
About this product
Description
Always install a new lens gasket (part number 79108600) whenever disassembling the light. Failure to do so may permit water to leak into the assembly which could cause:(a) An electrical hazard resulting in death or serious injury to pool users, installers, or others due to electrical shock.; or,(b) breakage of the lamp or lens, which likewise could result in serious injury to pool users, installers, or bystanders, or in damage to property.Highlights
The wet niche must be properly installed so the pilot screw hole is at the 12 o'clock position and that the top edge ofthe underwater light's lens is at least 18 inches below the surface of the water in the pool; see Figure 1.Features
Before replacing the light fixture.1. Verify that the pool meets the requirements of the current National Electrical Code and all local codes and ordinances.A licensed or certified electrician must install the electrical system to meet or exceed those requirements before theunderwater light is installed. Some of the requirements of the National Electrical Code which the pool’s electricalsystem must meet are as follows:a. The lighting circuit must have a Ground Fault Circuit Interrupter (GFCI), and must have an appropriately rated circuit breaker.b. The Junction Box (or, for 12 volt models, the low voltage transformer) must be located at least 8 inches above ground or water level, at least four (4) inches above ground level, and at least 48 inches from the edge of the pool; see Figure 1.c. The light fixture and all metal items within 5 feet of the pool must be properly electrically bonded.d. The wet niche must be properly installed so that the top edge of the underwater light’s lens is at least 18 inches below the surface of the water in the pool; see Figure 1.e. The wet niche must be properly electrically bonded and grounded via the No. 8 AWG ground connector located at the rear of the niche; see Figure 1Brand Information
Founded in 1966, Pentair has engineered water solutions to filter, clean and sanitize water to its purest state, while automation equipment makes it all easy to control from anywhere so that you can truly enjoy your pool and spa.
Visit Manufacturers Website -
Specifications
Never operate this underwater light for more than 10 seconds unless it is totally submerged in water. Without total submersion, thelight assembly will get extremely hot, which may result in serious burns or in breakage of the lamp or lens. This may result in seriousinjury to pool users, installers, or bystanders, or in damage to property.
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account