661455E | AquaChek Iron Test Strips Kit

$26.99
In stock
SKU
661455E
- +
Ask a Question

Ask a Question

661455E | AquaChek Iron Test Strips Kit

SKU#: 661455E

AquaChek Pool and Spa Water Quality Test Strips Kit For Checking Iron level. 661455E

$26.99

Maintaining proper total iron levels can prevent corrosion and rusting.
The recommended ideal level of iron in swimming pool water is zero ppm.

1. Fill sample vial Half Full with sample water. Open one foil packet and add powder contents to vial. Cap vial and shake rapidly for 5 seconds . Remove cap.
2. Dip a test strip into sample vial and rapidly move back and forth underwater 15 seconds. Remove and shake excess water from test strip.
3. Immediately compare test pad to color chart and record results. Estimate results if color on test pad falls between two color blocks.
4. Rinse sample vial with tap water after each use.

Ask a Question
661455E | AquaChek Iron Test Strips  Kit 661455E | AquaChek Iron Test Strips  Kit 661455E | AquaChek Iron Test Strips  Kit
661455E | AquaChek Iron Test Strips  Kit
  • Product Details

    About this product

    Description

    Incorporate a total iron test kit into your pool maintenance routine to ensure the longevity of your pool and spa fixtures. Maintaining proper total iron levels can prevent corrosion and rusting. Unlike some of our other dip & read strips, this test kit is geared towards a pool professional. It features a reagent product pillow, sample vial, and test strips to ensure accurate results.

    Highlights

    AquaChek Iron Test Strips measure Total Iron at 0, 0.15, 0.3, 0.6, 1, 2 and 5 ppm.
    Testing tips:
    The best results, sample water must be between 65F and 90F ( 18C and 32C).
    The presence of copper at levels of 0.8 ppm or greater may interfere with iron results.
    If testing pool or spa water that is sanitized with biguanide , shake rapidly for 10 seconds in Step1 and  let sample stand for 5 minutes before proceeding to Step 2.

    Features

    Maintaining proper total iron levels can prevent corrosion and rusting.
    The recommended ideal level of iron in swimming pool water is zero ppm.

    1. Fill sample vial Half Full with sample water. Open one foil packet and add powder contents to vial. Cap vial and shake rapidly for 5 seconds . Remove cap.
    2. Dip a test strip into sample vial and rapidly move back and forth underwater 15 seconds. Remove and shake excess water from test strip.
    3. Immediately compare test pad to color chart and record results. Estimate results if color on test pad falls between two color blocks.
    4. Rinse sample vial with tap water after each use.

  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov