25933-201-000 | CMP 3-Port Diverter Valve 2-2.5 inch

$54.99
In stock
SKU
25933-201-000
- +
Ask a Question

Ask a Question

25933-201-000 | CMP 3-Port Diverter Valve 2-2.5 inch

SKU#: 25933-201-000

CMP 3-Way Jandy Style PVC  Diverter Valve 2-2 1/2 inch Gray 25933-201-000

$54.99

Each CMP Pool Diverter Valve is designed to simultaneously fit two different size pipe.

PROFESSIONAL FEATURES
• High-Temp CPVC Styles Awarded the NSF International Seal
•Lifetime Seals Never Need Lubrication

Ask a Question
25933-201-000 | CMP 3-Port Diverter Valve 2-2.5 inch 25933-201-000 | CMP 3-Port Diverter Valve 2-2.5 inch 25933-201-000 | CMP 3-Port Diverter Valve 2-2.5 inch
25933-201-000 | CMP 3-Port Diverter Valve 2-2.5 inch
  • Product Details

    About this product

    Description

    Reference the chart below for the different configurations.
    If using the Socket (slip fit) plumbing method, simply insert the pipe into the valve port and glue into place. If using the Spigot plumbing method, the pipe must be joined with a coupler or elbow then the coupler or elbow fitting can be glued over the valve port. In both Socket and Spigot plumbing methods, the internal valve assembly must be removed prior to glueing. Make certain that no glue enters the valve body beyond the valve ports.

    Highlights

    • Exclusive 32-Stop Dial for Precise Control
    • Interchangeable Flow Tabs for Marking Ports
    • Advanced T-Gasket Seal on Union Valves

    Features

    Each CMP Pool Diverter Valve is designed to simultaneously fit two different size pipe.

    PROFESSIONAL FEATURES
    • High-Temp CPVC Styles Awarded the NSF International Seal
    •Lifetime Seals Never Need Lubrication

    Brand Information

    Founded in 1966, Pentair has engineered water solutions to filter, clean and sanitize water to its purest state, while automation equipment makes it all easy to control from anywhere so that you can truly enjoy your pool and spa.

    Visit Manufacturers Website
  • Specifications

    VALVE FUNCTION
    NOTE: VALVE HANDLE MUST NOT BE REMOVED DURING USE OR WARRANTY IS VOID.
    Lock Knob: Loosen the knob to turn the handle. Turn knob finger tight to secure handle.
    Off Indicator: The area on the handle labeled “OFF” shows the exact position of the internal diverter seal.
    Handle Stops: Pins located on the valve cover will stop the handle at the points of complete port shut-off. Be sure the “INLET” indicator on the valve cover is located over the incoming flow port.
    Indicator Ring: Used when a partially open port is desired.
    Decide how much of the port is to be open then turn and place the indicator ring so that the arrow points to where the valve handle should stop. The point on the front of the handle should line up with the point on the indicator ring to locate the stopping position.

  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov